Immediate Charge Mode
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
When EVSE is connected to the normal charge port, the on-board charger transmits a EV system activation signal to VCM. Li-ion battery charge then starts immediately.
When the timer charge is set, Li-ion battery charge does not start just after the on-board charger transmits a EV system activation signal to VCM. When VCM detects an ON signal from the immediate charging switch in that state, VCM judges that the immediate charge mode is selected and starts charging.
When the charge is finished and VCM receives a Li-ion battery charge completion signal from Li-ion battery controller, VCM stops the charge control.