Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" in "Work Support" mode of "INTELLIGENT KEY" of "BCM" using CONSLUT.

Refer to "INTELLIGENT KEY : CONSULT FUNCTION (BCM - INTELLIGENT KEY) ".

Go to 2.
CHECK SELF-DIAGNOSIS RESULT
Select "Self-Diagnosis Result" mode of "BCM" using CONSULT, and check whether or not DTC of inside key antenna is detected.

Is DTC detected?

YES: Perform the trouble diagnosis for detected DTC. Refer to "DTC INDEX ".

NO: Go to 3.
CHECK POWER SWITCH
Check power switch.

Refer to "COMPONENT FUNCTION CHECK ".

Is the inspection result normal?

YES: Go to 4.

NO: Repair or replace malfunctioning parts.
CHECK STOP LAMP SWITCH
Check stop lamp switch.

Refer to "COMPONENT INSPECTION ".

Is the inspection result normal?

YES: Go to 5.

NO: Repair or replace malfunctioning parts.
CONFIRM THE OPERATION
Confirm the operation again.

Is the inspection result normal?

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: Go to 1.