LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 187 (Security Control System) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ENGINE START FUNCTION
    1. Perform the check for DTC except DTC P1610.
    2. Use CONSULT-III to erase DTC after fixing.
    3. Turn ignition switch OFF.
    4. Turn ignition switch ON when registered Intelligent Key is inserted into key slot and wait for 5 seconds.
    5. Turn the ignition switch OFF and wait 5 seconds.
    6. Repeat steps  4 and  5 twice (a total of 3 times).
    7. Check that engine can start when registered Intelligent Key is inserted into key slot.

      INSPECTION END

scientia non olet · About LEMON Manuals