Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" on Work Support in "INTELLIGENT KEY".
Refer to "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) ".
Go to 2.
- PERFORM SELF-DIAGNOSTIC RESULT
Perform Self-Diagnostic Result in "BCM", and check whether or not DTC of inside key antenna is detected.
Is DTC detected?
YES: Refer to "DTC LOGIC " (console) or "DTC LOGIC " (luggage room).
NO: Go to 3.
- CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to "COMPONENT FUNCTION CHECK ".
Is the operation normal?
YES: Go to 4.
NO: Repair or replace malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".
NO: Go to 1.