LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 283 (Engine Control System - Introduction) >> System Description >> Diagnosis System (ECM) >> CONSULT Function >> Self Diagnostic Result Mode >> How to Erase DTC and 1st Trip DTC
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How to Erase DTC and 1st Trip DTC

WARNING: This page is about a different car, the 2012 Infiniti G25. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
  • If the DTC is not for A/T related items (see "DTC INDEX "), skip step 1.
  1. Erase DTC in TCM. Refer to "DTC INDEX ".
  2. Select "ENGINE" with CONSULT.
  3. Select "SELF-DIAG RESULTS".
  4. Touch "ERASE". (DTC in ECM will be erased.)
scientia non olet · About LEMON Manuals