Component Inspection (Cooling Fan Relay)

WARNING: This page is about a different car, the 2012 Infiniti G25. However, it is still accessible from the selected car via links, so may be relevant.

CHECK COOLING FAN RELAY

Turn ignition switch OFF.
Remove cooling fan relay. Refer to "COMPONENT PARTS LOCATION ".

Check the continuity between cooling fan relay terminals under the following conditions.

Terminals	Conditions	Continuity
3 and 5	12 V direct current supply between terminals 1 and 2	Existed
3 and 5	No current supply	Not existed

Fig 1: Identifying Cooling Fan Relay Terminals

Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace cooling fan relay. Refer to "COMPONENT PARTS LOCATION ".