Component Inspection (A/C Relay)

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

CHECK A/C RELAY

Turn power switch OFF.
Remove A/C relay.
Check the continuity between A/C relay terminals under the following conditions.

CONTINUITY REFERENCE CHART

Conditions	Terminals	Continuity
12 V direct current supply between terminals 1 and 2	3 - 5	Existed
12 V direct current supply between terminals 1 and 2	6 - 7	Existed
No current supply	3 - 5	Not existed
No current supply	6 - 7	Not existed

Fig 1: Checking Continuity Between A/C Relay Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace A/C relay.