Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HARNESS
- Turn power switch OFF.
- Disconnect VCM harness connector and Li-ion battery harness connector.
- Check continuity between VCM harness connector and Li-ion battery harness connector.
CONTINUITY REFERENCE CHART+ - Continuity VCM Li-ion battery Connector terminal Connector terminal E63 107 B24 17 Existed Is the inspection result normal?
YES: Go to 2.
NO: Repair harness or connector.
- CHECK SYSTEM MAIN RLY CIRCUIT
Check continuity between Li-ion battery connector terminals.
CONTINUITY REFERENCE CHARTLi-ion battery Continuity Terminals 16 17 Existed Is the inspection result normal?
YES: Go to 3.
NO: Repair or replace error-detected parts.
- CHECK SYSTEM MAIN RLY GROUND CIRCUIT
Check continuity between Li-ion battery harness connector and ground.
CONTINUITY REFERENCE CHART+ - Continuity Li-ion battery Connector terminal 16 Ground Ground Existed Is the inspection result normal?
YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".
NO: Repair or replace error-detected parts.