Component Inspection (F/S CHG Relay)

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

CHECK F/S CHG RELAY

Turn power switch OFF.
Remove F/S CHG relay.
Check the continuity between F/S CHG relay terminals under the following conditions.

CONTINUITY REFERENCE CHART

Terminals	Conditions	Continuity
3 and 5	12 V direct current supply between terminals 1 and 2	Existed
3 and 5	No current supply	Not existed

Fig 1: Checking Continuity Between F/S CHG Relay Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace F/S CHG relay.