LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Power Window Control System -- G37 Convertible) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement >> Initialization Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization Procedure

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery terminal or power window main switch connector while operating power window.

    Reconnect it after a minute or more.

  2. Door close (door switch OFF)
  3. Turn ignition switch ON.
  4. Fully open retractable hard top system and rear power window. This operation is not necessary if retractable hard top system and rear power window are fully open.
  5. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)
  6. Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 3 seconds or more.
  7. Inspect anti-pinch function.
scientia non olet · About LEMON Manuals