Component Inspection

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.

CHECK A/T SHIFT SELECTOR (DETENTION SWITCH)

Turn ignition switch OFF.
Disconnect A/T shift selector connector.

Check continuity between A/T shift selector (detention switch) terminals.

CONTINUITY SPECIFICATION

A/T shift selector (detention switch)		Condition		Continuity
Terminal		Condition		Continuity
10	11	Selector lever	P position	Not existed
10	11	Selector lever	Other than above	Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace A/T shift selector. Refer to "REMOVAL AND INSTALLATION ".