DTC Detection Logic
WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B2602 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC
".
- If DTC B2602 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC
".
DTC DETECTION LOGIC CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B2602 |
SHIFT POSITION |
BCM detects the following status for 10 seconds.
- Shift position is in the P position
- Vehicle speed is 4 km/h (2.5 MPH) or more
- Ignition switch is in the ON position
|
- Harness or connectors (A/T shift selector circuit is open or shorted)
- A/T shift selector (detention switch)
- ABS actuator and electric unit (control unit)
|