Component Inspection

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HOOD SWITCH

Turn ignition switch OFF.
Disconnect hood switch connector.

Check continuity between hood switch terminals.

CONTINUITY SPECIFICATION

Hood switch		Condition		Continuity
Terminal		Condition		Continuity
1	2	Hood	Close the hood	Not existed
1	2	Hood	Open the hood	Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace hood lock (RH). Refer to "HOOD LOCK CONTROL : REMOVAL AND INSTALLATION ".