LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Security Control System -- G37 Convertible) >> Removal And Installation >> Push Button Ignition Switch >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cluster lid A assembly. Refer to "A/T MODELS : REMOVAL AND INSTALLATION " (A/T models), "M/T MODELS : REMOVAL AND INSTALLATION " (M/T models).
  2. Remove the push-button ignition switch (1) from cluster lid A assembly, and then remove pawl (A). Press push-button ignition switch (1) back to disengage from cluster lid A assembly.
    Fig 1: Identifying Push-Button Ignition Switch With Pawl
    G04888450Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals