LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 108 (Power Control System (Sedan)) >> IPDM E/R >> Removal And Installation >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery cable from the negative terminal.
  2. Remove the cowl top cover (RH). Refer to "EXPLODED VIEW ".
  3. Pull up the IPDM E/R assembly while pressing the pawls (A) on the back of the IPDM E/R cover B (1).
    Fig 1: Identifying IPDM E/R Cover And Pawls
    G04889515Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove the IPDM E/R cover A (1). While pressing the pawls (A) at the lower end of the IPDM E/R cover A.
  5. Disconnect the harness connector and remove the IPDM E/R (2).
    Fig 2: Identifying IPDM E/R With Cover And Pawls
    G04889516Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove the bolts (A) and remove the bracket (1) from the vehicle.
    Fig 3: Identifying IPDM E/R Bolts And Bracket
    G05975023Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals