Data Monitor
WARNING: This page is about a different variant/trim than selected.
| Monitor item [Unit] | Description |
|---|---|
| PUSH SW [On/Off] | The switch status input from push-button ignition switch |
| ENGINE STATE [Stop/Stall/Crank/Run] | The engine status received from ECM with CAN communication |
| VEH SPEED 1 [km/h] | The value of the vehicle speed received from unified meter and A/C amp. with CAN communication |
| KEY SW-SLOT [On/Off] | Key switch status input from key slot |
| TURN SIGNAL R [On/Off] | Each switch status that BCM judges from the combination switch reading function |
| TURN SIGNAL L [On/Off] | |
| TAIL LAMP SW [On/Off] | |
| HI BEAM SW [On/Off] | |
| HEAD LAMP SW1 [On/Off] | |
| HEAD LAMP SW2 [On/Off] | |
| PASSING SW [On/Off] | |
| AUTO LIGHT SW [On/Off] | |
| FR FOG SW [On/Off] | |
| RR FOG SW [On/Off] |
NOTE:
The item is indicated, but not monitored.
|
| DOOR SW-DR [On/Off] | The switch status input from driver side door switch |
| DOOR SW-AS [On/Off] | The switch status input from passenger side door switch |
| DOOR SW-RR [On/Off] | The switch status input from rear door switch RH |
| DOOR SW-RL [On/Off] | The switch status input from rear door switch LH |
| DOOR SW-BK [On/Off] |
NOTE:
The item is indicated, but not monitored.
|
| OPTICAL SENSOR [V] | The value of exterior brightness voltage input from the optical sensor |