Data Monitor
WARNING: This page is about a different variant/trim than selected.
| Monitor Item [Unit] | Description |
|---|---|
| VEH SPEED 1 [km/h] | Displays the value of the vehicle speed signal received from unified meter and A/C amp. with CAN communication. |
| PUSH SW [Off/On] | The switch status input from push-button ignition switch. |
| FR WIPER HI [Off/On] | Status of each switch judged by BCM using the combination switch reading function |
| FR WIPER LOW [Off/On] | |
| FR WASHER SW [Off/On] | |
| FR WIPER INT [Off/On] | |
| FR WIPER STOP [Off/On] | Displays the status of the front wiper stop position signal received from IPDM E/R with CAN communication. |
| INT VOLUME [1 - 7] | Status of each switch judged by BCM using the combination switch reading function |