Component Inspection
WARNING: This page is about a different variant/trim than selected.
- CHECK POWER STEERING SOLENOID VALVE
- Turn the ignition switch OFF.
- Disconnect power steering solenoid valve harness connector.
- Check the resistance between power steering solenoid valve connector terminals.
Power steering solenoid valve Resistance (Approx.) Terminal 1 - 2 4 - 6 Ω - Check the power steering solenoid valve connector by listening for its operation sound while applying battery voltage to power steering solenoid valve connector F45 terminals 1 (positive) and 2 (negative).
Is the inspection result normal?
YES: INSPECTION END
NO: Replace gear-sub assembly. Refer to "2WD: EXPLODED VIEW " (2WD), "AWD: EXPLODED VIEW " (AWD).