DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
NOTE:
- If DTC B2605 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "BCM: DTC LOGIC ".
- If DTC B2605 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "BCM: DTC LOGIC ".
| DTC No. | Trouble diagnosis name | DTC detecting condition | Possible cause |
|---|---|---|---|
| B2605 | PNP/CLUTCH SW | BCM detects the following status for 500 ms or more when the ignition switch is in the ON position
|
|