Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK ENGINE START FUNCTION
- Perform the check for DTC except DTC P1610.
- Use CONSULT to erase DTC after fixing.
- Turn ignition switch OFF.
- Turn ignition switch ON when registered Intelligent Key is inserted into key slot and wait for 5 seconds.
- Turn the ignition switch OFF and wait 5 seconds.
- Repeat steps 4 and 5 twice (a total of 3 times).
- Check that engine can start when registered Intelligent Key is inserted into key slot.
: INSPECTION END