DTC Confirmation Procedure
WARNING: This page is about a different variant/trim than selected.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn ignition switch ON under the following conditions, and wait for at least 1 second.
A/T models
- A/T selector lever is in the P or N position
- Do not depress brake pedal
M/T models
- Do not depress clutch pedal
- Check "Self diagnostic result" with CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Turn ignition switch ON under the following conditions, and wait for at least 1 second.