Diagnosis Procedure
- CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)
Lock/unlock door with door request switch.
Refer to "SYSTEM DESCRIPTION ".
Is the operation normal?
YES: GO TO 2.
NO: Check Intelligent Key system (door lock function). Refer to "DIAGNOSIS PROCEDURE ".
- PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" on Work Support of "INTELLIGENT KEY".
Refer to "INTELLIGENT KEY: CONSULT FUNCTION (BCM - INTELLIGENT KEY) ".
: GO TO 3.
- PERFORM SELF DIAGNOSTIC RESULT
Perform Self Diagnostic Result of "BCM".
Is DTC detected?
YES: Refer to "DTC LOGIC " (instrument center), "DTC LOGIC " (console) or "DTC LOGIC " (trunk room).
NO: GO TO 4.
- CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to "REMOVAL AND INSTALLATION ".
Is the operation normal?
YES: GO TO 5.
NO: Repair or replace malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".
NO: GO TO 1.