Battery Saver System
WARNING: This page is about a different variant/trim than selected.
When all the following conditions are met for 60 minutes, the battery saver system will cut off the power supply to prevent battery discharge.
- The ignition switch is in the ACC position
- All doors are closed
- Selector lever is in the P position (A/T models)
Reset Condition of Battery Saver System
If any of the following conditions are met the battery saver system is released.
- Opening any door
- Operating with door request switch on door lock
- Operating with Intelligent Key on door lock
- Change ignition switch position to ACC position from OFF position by pressing push-button ignition switch.