LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Body Control System) >> System Description >> Diagnosis System (BCM) >> Intelligent Key >> INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) >> Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
ACTIVE TEST REFERENCE CHART

Test item Description
OUTSIDE BUZZER This test is able to check Intelligent Key warning buzzer operation
  • On: Operate
  • Off: Non-operation
INSIDE BUZZER This test is able to check warning chime in combination meter operation
  • Take Out: Take away warning chime sounds when CONSULT screen is touched
  • Key: Key warning chime sounds when CONSULT screen is touched
  • Knob: OFF position warning chime sounds when CONSULT screen is touched
  • Off: Non-operation
INDICATOR This test is able to check warning lamp operation
  • KEY ON: "KEY" Warning lamp illuminates when CONSULT screen is touched
  • KEY IND: "KEY" Warning lamp blinks when CONSULT screen is touched
  • Off: Non-operation
INT LAMP This test is able to check interior room lamp operation
  • On: Operate
  • Off: Non-operation
LCD This test is able to check meter display information
  • Traction motor start information displays when "BP N" on CONSULT screen is touched
  • Traction motor start information displays when "BP I" on CONSULT screen is touched
  • Key ID warning displays when "ID NG" on CONSULT screen is touched
  • ROTAT: This item is displayed, but cannot be used
  • INSRT: This item is displayed, but cannot be used
  • Intelligent Key low battery warning displays when "BATT" on CONSULT screen is touched
  • Take away warning displays when "OUTKEY" on CONSULT screen is touched
  • OFF position warning displays when "LK WN" on CONSULT screen is touched
FLASHER This test is able to check security hazard lamp operation
The hazard lamps are activated after "LH/RH/Off" on CONSULT screen is touched
HORN This test is able to check horn operation
  • On: Operate
  • Off: Non-operation
P RANGE This test is able to check P position signal from electric shift control unit
  • On: Operate
  • Off: Non-operation
ENGINE SW ILLUMI This test is able to check power switch illumination operation
Power switch illumination illuminates when "ON" on CONSULT screen is touched
PUSH SWITCH INDICATOR This test is able to check LOCK indicator in power switch operation
LOCK indicator in power switch illuminates when "ON" on CONSULT screen is touched
BATTERY SAVER This test is able to check interior room lamp operation.
The interior room lamp will be activated after "ON" on CONSULT screen is touched.
TRUNK/BACK DOOR This test is able to check back door opener actuator open operation.
This actuator opens when "Open" on CONSULT screen is touched.