Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "PUSH SW" in "Data Monitor" mode with CONSULT.

Check power switch (push switch) signal under the following conditions.

POWER SWITCH (PUSH SWITCH) SIGNAL CHECK CONDITIONS

Test item	Condition	Status
PUSH SW	Power switch (push switch) is pressed	ON
PUSH SW	Power switch (push switch) is not pressed	OFF

Is the indication normal?

YES: INSPECTION END.

NO: Go to "DIAGNOSIS PROCEDURE ".