DTC Confirmation Procedure
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Check that "SYSTEM MAIN RLY 1" and "PRE CHARGE RLY" in "BATTERY PACK" are in a shutoff state.
- Clear DTC to maintain power switch OFF state for 60 seconds.
- Set the vehicle to READY and perform test drive.
- Turn power switch OFF and wait at least 60 seconds.
- Check self-diagnostic result.
Is DTC detected?
YES: "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END