Component Function Check
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
With CONSULT
- Turn power switch ON.
- Select "STOP LAMP SW 1" in "DATA MONITOR" mode with CONSULT.
- Check "STOP LAMP SW 1" indication under the following conditions.
MONITOR ITEMS CONDITION REFERENCE CHART
| Monitor item | Condition | Indication | |
|---|---|---|---|
| STOP LAMP SW 1 | Brake pedal | Slightly depressed | ON |
| Fully released | OFF | ||
Is the inspection result normal?
YES: INSPECTION END
NO: Proceed to "DIAGNOSIS PROCEDURE ".