LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> G37 IPL, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (EV Control System) >> System Description >> Diagnosis System (VCM) >> CONSULT Function >> Self-Diag Results Mode >> Freeze Frame Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

The Freeze Frame Data shows the state of the vehicle at the time a DTC is detected and is useful in re-creating the circumstances that caused the malfunction.

Freeze Frame Data Item List

FREEZE FRAME DATA ITEM LIST

Freeze frame data item Description
DTC The item is indicated, but not used.
VCM MODE Displays VCM status.
  • 0-7: During VCM starts-up
  • 10: Power switch is ON and the charge connector is not connected.
  • 11-29: Mode changing to READY
  • 30: READY
  • 31-68: During system shutdown
  • 109, 110: Power switch is ON and the charge connector is not connected.
  • 111-129: Mode changing to charge mode.
  • 130: During charging
  • 131-144: During system shutdown
  • 211-229: Mode changing to automatic 12V battery charging or remote charging mode without charging connector connection.
  • 230: During automatic 12V battery charging or remote charging mode without charging connector connection.
  • 231-246: During system shutdown
VCM ACTIVAT TRIG Displays the cause of VCM start-up.
CHG PORT CONNECT Displays the connection status of the charge connector
  • 1: Quick charge connector is connected.
  • 2: Normal charge connector is connected
VEHICLE SPEED [km/h] or [mph] Displays the vehicle speed that is calculated from the motor speed.
SHIFT POSITION Displays the shift position.
COOLANT TEMP [degC] Displays the coolant temperature.
MOTOR SPEED [RPM] Displays the traction motor speed.
ACCEL OPEN ANGLE [deg] Displays the accelerator pedal openness.
TRG TORQ [Nm] Displays the target motor torque.
TRG POWER [N] Displays the target motor output.
TRG REGE TORQ [Nm] Displays the target motor regeneration torque.
HV BATT VOLT [V] Displays the Li-ion battery voltage.
HV BATT CURRENT [A] Displays the Li-ion battery current.
HV BATT TEMP [degC] Displays the Li-ion battery temperature.
REGENERABLE PWR [kW] Displays the Li-ion battery regenerable power.
CHARGEABLE PWR MAX [kW] Displays the Li-ion battery chargeable power.
AVAILABLE HV BAT PWR [kW] Displays the Li-ion battery available discharge power.
ERROR TYPE [Ah] The item is indicated, but not used.
scientia non olet · About LEMON Manuals