Component Function Check
WARNING: This page is about a different variant/trim than selected.
- CONFIRM SYMPTOM BY PERFORMING THE FOLLOWING OPERATIONAL CHECK
- Press fan (UP: +) switch*1 (turn fan control dial clockwise*2). Blower should operate on low speed.NOTE: *1: With left and right ventilation temperature separately control system.
*2: Without left and right ventilation temperature separately control system. - Press fan (UP: +) switch*1 (turn control dial clockwise*2), and continue checking fan speed and fan symbol until all speeds checked.
NOTE: *1: With left and right ventilation temperature separately control system.
*2: Without left and right ventilation temperature separately control system.Is the inspection result normal?
YES: INSPECTION END
NO: Go to diagnosis procedure. Refer to "Diagnosis Procedure ".
- Press fan (UP: +) switch*1 (turn fan control dial clockwise*2). Blower should operate on low speed.