April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection procedure

WARNING: This page is about a different variant/trim than selected.

CHECK OPERATION
1. Set temperature control dial to 32°C (90°F).
2. Press OFF switch.
3. Turn ignition switch OFF.
4. Turn ignition switch ON.
5. Press AUTO switch.
6. Check that the set temperature is maintained.
Is the inspection result normal?

YES: INSPECTION END

NO: GO TO 2.
CHECK POWER SUPPLY AND GROUND CIRCUIT OF UNIFIED METER AND A/C AMP
Check power supply and ground circuit of unified meter and A/C amp. Refer to "UNIFIED METER AND A/C AMP.: Diagnosis Procedure ".

Is the inspection result normal?

YES: Replace unified meter and A/C amp.

NO: Repair or replace malfunctioning part.