DTC Confirmation Procedure
WARNING: This page is about a different variant/trim than selected.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn the ignition switch ON under the following conditions and wait 1 second or more.
A/T models
- Selector lever is in the P or N position
- Do not depress brake pedal
M/T models
- Do not depress clutch pedal
- Check "Self-diagnostic result" using CONSULT.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Turn the ignition switch ON under the following conditions and wait 1 second or more.