Component Inspection
WARNING: This page is about a different variant/trim than selected.
- CHECK A/T SHIFT SELECTOR (DETENTION SWITCH)
- Turn ignition switch OFF.
- Disconnect A/T shift selector (detention switch) connector.
- Check continuity between A/T shift selector (detention switch) terminals.
A/T shift selector (detention switch) Condition Continuity Terminal 10 11 Selector lever P position Not existed Other than above Existed Is the inspection result normal?
YES: INSPECTION END
NO: Replace A/T shift selector (detention switch). Refer to "2WD: REMOVAL AND INSTALLATION " (2WD) or "AWD: REMOVAL AND INSTALLATION " (AWD).