DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
NOTE:
- If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "BCM: DTC LOGIC ".
- If DTC B260F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to "BCM: DTC LOGIC ".
| DTC No. | Trouble diagnosis name | DTC detecting condition | Possible cause |
|---|---|---|---|
| B260F | INTERRUPTION OF ENGINE STATUS SIGNAL | BCM has not yet received the engine status signal from ECM when ignition switch is in the ON position. | ECM |