Additional Service When Removing 12V Battery Negative Terminal: Description
Each function is reset to the following condition when the 12V battery terminal is disconnected.
| Function | Condition | Procedure | ||
|---|---|---|---|---|
| Memory (Seat, steering, mirror) | Erased | Perform storing | ||
| Entry/exit assist | ON | Perform initialization | ||
| Set slide amount(1) | ||||
| Intelligent Key interlock | Erased | Perform initialization | ||
| Perform storing | ||||
| Seat synchronization | OFF | - | ||
|
||||
NOTE:
Notice that disconnecting the 12V battery when detected DTC are present will erase the DTC memory.