Diagnosis Procedure
- CHECK OIL PRESSURE WARNING LAMP
- Perform "INSPECTION MODE 5". Refer to "DESCRIPTION ".
- Start engine.
- Check that oil pressure warning lamp is not illuminated.
Is oil pressure warning lamp illuminated?
YES: Refer to "INSPECTION ".
NO: GO TO 2.
- CHECK EXHAUST VALVE TIMING CONTROL SOLENOID VALVE
Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: GO TO 3.
NO: Replace malfunctioning exhaust valve timing control solenoid valve. Refer to "EXPLODED VIEW ".
- CHECK EXHAUST VALVE TIMING CONTROL POSITION SENSOR
Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: GO TO 4.
NO: Replace malfunctioning exhaust valve timing control position sensor. Refer to "EXPLODED VIEW ".
- CHECK CRANKSHAFT POSITION SENSOR
Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: GO TO 5.
NO: Replace crankshaft position sensor. Refer to "EXPLODED VIEW ".
- CHECK CAMSHAFT POSITION SENSOR
Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: GO TO 6.
NO: Replace malfunctioning camshaft position sensor. Refer to "EXPLODED VIEW ".
- CHECK CAMSHAFT (EXH)
Check the following.
- Accumulation of debris on the signal plate of camshaft rear end
- Chipping signal plate of camshaft rear end
Is the inspection result normal?
YES: GO TO 7.
NO: Remove debris and clean the signal plate of camshaft rear end or replace camshaft. Refer to "EXPLODED VIEW ".
- CHECK TIMING CHAIN INSTALLATION
Check service records for any recent repairs that may cause timing chain misaligned.
Are there any service records that may cause timing chain misaligned?
YES: Check timing chain installation. Refer to "INSPECTION ".
NO: GO TO 8.
- CHECK LUBRICATION CIRCUIT
Perform "Inspection of Camshaft Sprocket (EXT) Oil Groove". Refer to "INSPECTION ".
Is the inspection result normal?
YES: GO TO 9.
NO: Clean lubrication line.
- CHECK INTERMITTENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".
: INSPECTION END