Diagnosis Procedure
- CHECK TERMINALS AND HARNESS CONNECTORS
Check power steering control module pin terminals for damage or loose connection with harness connector.
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace error-detected parts.
- PERFORM SELF-DIAGNOSIS
◦ With CONSULT
- Turn the ignition switch OFF to ON.
- Erase self-diagnostic results for "EPS".
- Turn the ignition switch OFF and wait for at least 10 seconds.
- Perform self-diagnosis for "EPS".
Is DTC "C1607" or "C1608" detected?
YES: Power steering control module is malfunction. Replace power steering oil pump assembly. Refer to "REMOVAL AND INSTALLATION " (With heated steering wheel), "REMOVAL AND INSTALLATION " (Without heated steering wheel).
NO: Check the pin terminals for damage or loose connection with harness connector. If any items are damaged, repair or replace error-detected parts.