WITH ICC: Component Inspection (Shift Lock Unit)
- CHECK SHIFT LOCK SOLENOID
Apply voltage to terminals 6 and 4 of A/T shift selector connector, and check that shift lock unit is activated.
CAUTION:- Connect the fuse between the terminals when applying the voltage.
- Never cause shorting between terminals.
Shift lock unit connector Condition Status Terminal + (fuse) - 6 4 Apply 12 V direct current between terminals 6 and 4. Shift lock unit operates Can the lock plate be moved up and down?
YES: INSPECTION END
NO: Replace A/T shift selector assembly. Refer to "EXPLODED VIEW ".