Diagnosis Procedure

Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

Is DTC detected? 

YES: Perform the trouble diagnosis related to the detected DTC. Refer to "DTC INDEX ".

NO: GO TO 2.

1. Turn ignition switch ON.
2. Select "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.
3. Touch "ERASE".
4. Perform DTC CONFIRMATION PROCEDURE for DTC B210C. Refer to "DTC LOGIC ".

   Is DTC detected? 

   YES: GO TO 3.

   NO: INSPECTION END

1. Replace BCM. Refer to "REMOVAL AND INSTALLATION ".
2. Perform DTC CONFIRMATION PROCEDURE for DTC B210C. Refer to "DTC LOGIC ".

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Replace IPDM E/R. Refer to "REMOVAL AND INSTALLATION ".