Diagnosis Procedure
- PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" in "Work Support" mode of "INTELLIGENT KEY" of "BCM" using CONSULT.
Refer to "INTELLIGENT KEY: CONSULT FUNCTION (BCM - INTELLIGENT KEY) ".
: GO TO 2.
- PERFORM SELF-DIAGNOSIS RESULT
Select "Self Diagnostic Result" mode of "BCM", and check whether or not DTC of inside key antenna is detected.
Is DTC detected?
YES: Refer to "DTC LOGIC " (instrument center), "DTC LOGIC ", (console) or "DTC LOGIC " (trunk room).
NO: GO TO 3.
- CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to "COMPONENT FUNCTION CHECK ".
Is the operation normal?
YES: GO TO 4.
NO: Repair or replace malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".
NO: GO TO 1.