Approach Warning Display

If own vehicle comes closer to the vehicle ahead due to rapid deceleration of that vehicle or if another vehicle cuts in, the system warns the driver with the chime and DCA system display. Decelerate by depressing the brake pedal to maintain a safe vehicle distance if:
- The chime sounds.
- The vehicle ahead detection indicator blinks.
The warning chime may not sound in some cases when there is a short distance between vehicles. Some examples are:
- When the vehicles are traveling at the same speed and the distance between vehicles is not changing
- When the vehicle ahead is traveling faster and the distance between vehicles is increasing
- When a vehicle cuts in near own vehicle
The warning chime will not sound when own vehicle approaches vehicles that are parked or moving slowly.

Condition	Display on combination meter
When the system judges that the brake operation by the driver is necessary

WARNING LAMP DISPLAY DESCRIPTION

Condition		Description
Warning display	When the dynamic driver assistance switch is turned ON with settings of DCA system, LDP system and BSI system OFF	The DCA system is not activated. The DCA system switch indicator blinks
	When the VDC or ABS (including the TCS) operates When the VDC is turned OFF When the drive mode select switch is in SNOW position When driving into a strong light (i.e., sunlight)	The DCA system is automatically canceled. The chime will sound and the DCA system switch indicator will blink NOTE: The system operates if the dynamic driver assistance switch is turned OFF==>ON after the condition improves
	When the sensor window is dirty, making it impossible to detect a vehicle ahead	The DCA system is automatically canceled. The chime sounds and the ICC system warning lamp will come on and the "CLEAN SENSOR" indicator will appear NOTE: Stop the vehicle in a safe location and turn the ignition switch OFF. Clean the dirty area with soft cloth. The system returns to normal condition when turning the ignition switch ON again
	When the DCA system is not operating properly	The chime sounds and the ICC system warning lamp will come on NOTE: Turn the ignition switch OFF, and then turn the ignition switch ON again. If there is no malfunction, the system returns to the normal condition

NOTE: When the DCA system is automatically canceled, the cancellation condition can be displayed on "WORK SUPPORT" of CONSULT (ICC/ADAS).