Operating Condition
- LDP ON indicator lamp: ON
- Vehicle speed: approximately 70 km/h (45 MPH) or more
- Turn indicator signal: After 2 seconds or more from turned OFF
NOTE:
- When the LDP system setting on the navigation screen is ON.
- After the operating conditions are satisfied, the control continues until the vehicle speed reaches approximately 60 km/h (40 MPH).
- The LDP system may not function properly, depending on the situation. Refer to "PRECAUTIONS FOR LANE DEPARTURE WARNING/LANE DEPARTURE PREVENTION ".
BULB CHECK ACTION AND FAIL-SAFE INDICATION
| Vehicle condition/Driver's operation | Indication on the combination meter | Buzzer |
|---|---|---|
| Ignition switch OFF ==> ON (Bulb check) |
- | |
| When DTC is detected (Except "C1B01" and "C1B03") | Beep | |
| Camera aiming is not completed ("C1B01" is detected)
NOTE:
This is detected while driving the vehicle and the indication remains ON until the ignition switch is turned OFF
|
||
| Temporary disabled status at high temperature ("C1B03" is detected) | Beep | |
| When the dynamic driver assistance system switch is pressed (When the settings of LDP system, DCA system, and BSI system on the navigation screen are "OFF") | - |