All Signals

Displays the status of the following vehicle signals inputted into the AV control unit.
For each signal, actual signal can be compared with the condition recognized on the system.

Display Item	Display	Vehicle status	Remarks
VHCL SPD SIG	On	Vehicle speed > 0 km/h (0 MPH)	Changes in indication may be delayed. This is normal.
VHCL SPD SIG	Off	Vehicle speed = 0 km/h (0 MPH)
PKB SIG	On	Parking brake is applied.
PKB SIG	Off	Parking brake is released.
ILLUM SIG	On	Block the light beam from the auto light optical sensor when the light switch is ON.	-
ILLUM SIG	Off	Either of the following conditions Lighting switch OFF Expose the auto light optical sensor to light when the light switch is ON.
IGN SIG	On	Ignition switch ON
IGN SIG	Off	Ignition switch in ACC position
REV SIG	On	Selector lever in R position	Changes in indication may be delayed. This is normal.
REV SIG	Off	Selector lever in any position other than R	Changes in indication may be delayed. This is normal.
SIDE VIEW SW	Off	-	This item is displayed, but cannot be monitored.
ROOM LAMP	Off	-	This item is displayed, but cannot be monitored.