Front Wiper Service Position Operation

• When front wiper switch MIST is operated 2 times, front wiper operates at LO and stops so that front wiper can be locked back.

Front wiper service position operation conditions

• Ignition switch ON.
• Front wiper switch OFF.
• Shift position N or P
• Vehicle speed is 4 km/h or less

• Front wiper operates at LO and stops, when IPDM E/R detects that front wiper request signal from BCM via CAN communication changes from LO to OFF 2 times while the stop position of front wiper position signal is detected (last detection is OFF).