Diagnosis Procedure

PERFORM INITIALIZATION
Perform initialization of BCM and reregistration of all Intelligent Keys using CONSULT.

Can the system be initialized and can the engine be started with reregistered Intelligent Key?

YES: INSPECTION END

NO: GO TO 2.
CHECK SELF-DIAGNOSIS RESULT
1. Select "Self Diagnostic Result" mode of "BCM" using CONSULT.
2. Erase DTC.
3. Perform DTC CONFIRMATION PROCEDURE for DTC B2192. Refer to "DTC LOGIC ".
  Is DTC detected?
  
  YES: GO TO 3.
  
  NO: INSPECTION END
REPLACE BCM
1. Replace BCM. Refer to "REMOVAL AND INSTALLATION ".
2. Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
  Can the system be initialized and can the engine be started with registered Intelligent Key?
  
  YES: INSPECTION END
  
  NO: GO TO 4.
REPLACE ECM
1. Replace ECM. Refer to "REMOVAL AND INSTALLATION " (VQ37VHR), "REMOVAL AND INSTALLATION " (VK56VD).
2. Perform "ADDITIONAL SERVICE WHEN REPLACING ECM". Refer to "WORK PROCEDURE " (VQ37VHR), "WORK PROCEDURE " (VK56VD).
  : INSPECTION END