LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Security Control System) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ENGINE START FUNCTION 
    1. Check that DTC except for DTC P1610 is not detected.

      If detected, erase the DTC after fixing.

    2. Turn ignition switch OFF.
    3. Contact the registered Intelligent Key backside to push-button ignition switch and wait 5 seconds.
    4. Turn ignition switch ON.
    5. Turn ignition switch OFF and wait 5 seconds.
    6. Repeat steps  3 and  5 twice (a total of 3 times).
    7. Check that engine can start.

      : INSPECTION END

scientia non olet · About LEMON Manuals