Component Inspection

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HOOD SWITCH

Turn ignition switch OFF.
Disconnect hood switch connector.

Check continuity between hood switch terminals.

Hood switch		Condition		Continuity
Terminal		Condition		Continuity
1	2	Hood switch	Press	Not existed
1	2	Hood switch	Release	Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace hood lock (RH). Refer to "HOOD LOCK: REMOVAL AND INSTALLATION ".