Work Procedure

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

SAVING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to "DESCRIPTION ".

NOTE: If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual setting" after replacing A/C auto amp.

: GO TO 2.
REPLACE A/C AUTO AMP.
Replace A/C auto amp. Refer to "REMOVAL AND INSTALLATION ".

: GO TO 3.
WRITING VEHICLE SPECIFICATION
CONSULT Configuration

Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual setting" to write vehicle specification. Refer to "WORK PROCEDURE ".

: WORK END