Diagnosis Procedure
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONTINUITY CONTROL SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect TEL adapter unit connector.
- Check continuity between TEL adapter unit harness connector and ground.
TEL adapter unit Ground Continuity Connector Terminals B237 21 Existed 23 24 Is the inspection result normal?
YES: Replace TEL adapter unit. Refer to "REMOVAL AND INSTALLATION ".
NO: Repair harness or connector.