Removal and Installation: Removal
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the trunk front finisher. Refer to "EXPLODED VIEW ".
- Remove the rear parcel shelf finisher. Refer to "REMOVAL AND INSTALLATION ".
- Remove the active noise control unit mounting bolts.
- Disconnect the connectors to remove the active noise control unit from the rear parcel shelf (trunk room side).
NOTE:
The active noise control unit has urethane foam as a holder to facilitate removal and installation procedure.