All Items
WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
- Displays the status of the following vehicle signals inputted into TCU.
- For each signal, the actual signal can be compared with the condition recognized on the system.
| Display item | Display | Condition | Note |
|---|---|---|---|
| ECHO CANCEL | type 1 | - | This item is displayed, but cannot be monitored. |
| type 2 | |||
| type 3 | |||
| type 4 | |||
| NOISE CANCEL | type 1 | - | This item is displayed, but cannot be monitored. |
| type 2 | |||
| type 3 | |||
| type 4 | |||
| TCU STANDBY TIME | 14 DAYS | Set at 14 days (default) | Set value for continued operation time to control battery consumption |
| 2 DAYS | Set at 2 days | ||
| 30 DAYS | Set at 30 days | ||
| NON | No setting | ||
| NAD OUTPUT STATUS | On | When TCU activation is ON | NAD: Abbreviation of Network Access Device. ON/OFF setting of radio wave |
| Off | When TCU activation is OFF | ||
| ACN COMM SEQUENCE LOG | - | - | - |
| SOS COMM SEQUENCE LOG | - | - | - |